My activities for the month of stardate 20636 are/is

[Smucky]

Feeling pretty good today

Also spent all week adding a "family chat" feature to my app

Screenshot_20260724_114349-1.png (27.47 KiB) Viewed 38 times

[NinjaPoodle]

That's probably a real conversation.

[Smucky]

Now to bed

[Smucky]

Always some random BS going on around here

[Smucky]

I've never had issues running into my weekly claude limits. Doesn't reset until Tuesday
I would typically leave a bunch of stuff running over the weekend but even not doing that I don't see how I can get through Monday at this level
Ain't no way I will ever upgrade to the $200 a month plan

Screenshot_20260725_131919.png (30.96 KiB) Viewed 32 times

[NinjaPoodle]

You better pay, otherwise the AI boom will crash.

[Smucky]

Screenshot_20260725_162251.png (30.82 KiB) Viewed 28 times

[Smucky]

I think I will get back out there Thursday to continue on working.

I guess first order of things,
Clean up head bolts, then get it torqued
Drop in push rods
Then bolt on rock arm assembly
Then turn over engine again with starter with the injectors still out. Engine will be "fully" assembled so should build oil pressure on the gauge.
Then drop oil pan again and pull some bearings to see if any crap has contaminated them.
If NO, then move on to getting all the bottom end torqued, then install oil pan "for real"
Then adjust valve gaps.
Install injectors.
Install fuel lines, turn engine over some more to prime fuel lines before fully tightening.
Then see if it will fire up. Will leave intake and exhaust manifolds off for maximum effect.
Service book says after first start up and warm up to re-torque head bolts again and check valve gaps while hot.

Thursday came and went so now that it is Sunday I guess I should get to work on this.

First up. Head bolts

[Smucky]

I think I will get back out there Thursday to continue on working.

I guess first order of things,
Clean up head bolts, then get it torqued
Drop in push rods
Then bolt on rock arm assembly
Then turn over engine again with starter with the injectors still out. Engine will be "fully" assembled so should build oil pressure on the gauge.
Then drop oil pan again and pull some bearings to see if any crap has contaminated them.
If NO, then move on to getting all the bottom end torqued, then install oil pan "for real"
Then adjust valve gaps.
Install injectors.
Install fuel lines, turn engine over some more to prime fuel lines before fully tightening.
Then see if it will fire up. Will leave intake and exhaust manifolds off for maximum effect.
Service book says after first start up and warm up to re-torque head bolts again and check valve gaps while hot.

Thursday came and went so now that it is Sunday I guess I should get to work on this.

First up. Head bolts

PXL_20260727_003137207.jpg

Got the head bolts in a torqued. Not sure how that took two hours.
But did have to spend time cleaning stuff and double checking everything.
Started to get the rocker arm assembly on, but that was not as straight forward as I thought so called it a night.

Now for today, looks like I only got about 2 hours of deep thinking left on my AI plan, trying to figure out how to make it last all day

Screenshot_20260727_125915.png (30.32 KiB) Viewed 23 times

[Smucky]

Screenshot_20260727_130644.png (30.73 KiB) Viewed 21 times

[Smucky]

Back to zero. Lets blow it up today

Screenshot_20260728_113101.png (31.38 KiB) Viewed 18 times

[Smucky]

Back to zero. Lets blow it up today

Screenshot_20260728_113101.png

Filling slowly not sure how it pegged out so quickly last week

Screenshot_20260728_161146.png (30.09 KiB) Viewed 15 times

[NinjaPoodle]

I think I will get back out there Thursday to continue on working.

I guess first order of things,
Clean up head bolts, then get it torqued
Drop in push rods
Then bolt on rock arm assembly
Then turn over engine again with starter with the injectors still out. Engine will be "fully" assembled so should build oil pressure on the gauge.
Then drop oil pan again and pull some bearings to see if any crap has contaminated them.
If NO, then move on to getting all the bottom end torqued, then install oil pan "for real"
Then adjust valve gaps.
Install injectors.
Install fuel lines, turn engine over some more to prime fuel lines before fully tightening.
Then see if it will fire up. Will leave intake and exhaust manifolds off for maximum effect.
Service book says after first start up and warm up to re-torque head bolts again and check valve gaps while hot.

Thursday came and went so now that it is Sunday I guess I should get to work on this.

First up. Head bolts

PXL_20260727_003137207.jpg

I'm not sure if you are supposed to put main on the head surface. It needs to be clean and flat.

[Smucky]

My AI usage from yesterday, was a steady day, but I can see how I might be able to get it to 20% a day which would only leave 5 days. Hard to tell if they are screwing with the limits or I am just using more

Screenshot_20260729_013617.png (30.21 KiB) Viewed 10 times

[Smucky]

Ran by CVS to pick up my jew pills. The normal work flow is you step up to the pharmacy and then bark out your last name and then hand them your driver's license.
But they enshitified this with a kiosk

So now the work flow is type in your first and last name. Then your birthday. All with one finger on the nasty snot touch screen then you stand around waiting for some one to call you up
I'd be curious how the initial meeting for this design was pitched in the board meeting. There is no way it was pitched as "customers will like this better"

[Smucky]

Dental fag crap for today

[Smucky]

[NinjaPoodle]

Jew pills and dentist

[Smucky]

Man I'm sleepy.
Also my breath stinks